NOTE ** This section is based on products manufactured by Kenstan Lock, at the following address:
NOTE ** 101 Commercial Street
NOTE ** Plainview NY 11803
NOTE ** Tel: (516) 576-9090
NOTE ** Fax: (516) 576-0100
NOTE ** e-mail address: kenstan@kenstan.com
NOTE ** Internet: www.kenstan.com
NOTE ** Kenstan Lock offers a complete line of products for showcase and cabinet locks in five security levels, and can provide single-key security for doors and cabinets.
NOTE **
NOTE ** It will be essential to have the manufacturer's product literature available while editing the section. Refer to it for model numbers, dimensions, options, and finishes other than standard.
NOTE **
NOTE ** AUTOCAD.DWG drawings are available on CD-ROM upon request.
NOTE **
NOTE ** SECTION 06414 - CABINET LOCKS, Copyright 1998, The Architect's Catalog, Inc.
PART 1 GENERAL
1.1 SECTION INCLUDES
NOTE ** Edit the paragraph below to define the types and/or location of cabinets that these locks are for, such as "custom wood cabinets," "manufactured metal cabinets," etc. Then delete the types of locks that are not required. It will also be necessary to identify the location of each lock, either by a general description, by noting on the drawings, or in a schedule.
A. Locks for drawers, swinging doors, and sliding doors of ____________, including:
1. Drawer and Door Cam Locks.
2. Drawer Gang Locks.
3. Door and Drawer Dead Bolt Locks.
4. Drawer and Door Spring Bolt Locks.
5. Sliding Door Z Bolt Locks.
6. Sliding Door Plunger Locks.
7. Sliding Glass Door Plunger Locks.
8. Sliding Door Ratchet Locks.
9. Sliding Door Spring Loaded Bolt Locks.
10. Sliding Door Through-Track Locks.
11. Sliding Door End Cap Locks.
12. Metal Cabinet Door Handle Locks.
13. Metal Cabinet Drawer Locks.
14. Padlocks.
1.2 RELATED SECTIONS
NOTE ** Delete any sections below not relevant to this project; add others as required.
A. Section 06220 - Millwork.
B. Section 06410 - Custom Cabinets.
C. Section 12300 - Manufactured Casework.
1.3 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's descriptive literature for each specified product; include recommended installation accessories for project conditions.
C. Verification Samples: Two items of each specified product; label items with manufacturer's name and model number of item.
D. Quality Assurance Submittals: Manufacturer's printed installation instructions for each specified product; include recommendations for specific project conditions.
1.4 DELIVERY, STORAGE, AND HANDLING
A. Packing, Shipping, Handling and Unloading: Seal each lock, with accompanying accessories, in clear polyethylene bag; label each lock with manufacturer's name and model number of item.
B. Storage and Protection: Store products in manufacturer's unopened packaging until installation.
NOTE ** Delete article below if specifying locks to be keyed alike.
1.5 SEQUENCING
A. Supply to lock manufacturer Owner-approved keying schedule in time for scheduled fabrication of locks.
NOTE ** Delete one of the two paragraphs below; coordinate with Division 1 requirements.
B. Requests for substitutions will be considered in accordance with provisions of Section 01600.
C. Substitutions: Not permitted.
NOTE ** Delete paragraph below if substitutions not permitted.
D. Supply each product specified in this section from a single manufacturer; supply all products specified in this section from a single manufacturer.
2.2 MANUFACTURED UNITS
NOTE ** The following applies to:
NOTE ** K11-K18XL Series KM1-KM18XL Series P16-P18 Series
NOTE ** KIC17-KIC18 Series M11-M18XL Series
NOTE **
NOTE ** Consult manufacturer's product data for model numbers, dimensions, options, and finishes other than standard.
A. Drawer and Door Cam Locks:
1. Acceptable Product: Kenstan Lock _____.
NOTE ** Ensure that threading of lock is sufficient for drawer front material thickness.
2. Barrel length: ____ inch(es) (__ mm).
NOTE ** Delete one of two paragraphs below; captive operation allows key removal in locked position only, non-captive operation allows key removal in locked and unlocked positions.
3. Key Operation: Captive.
4. Key Operation: Non-captive.
NOTE ** Delete all but one of the following cam descriptions. Insert required information in the remaining paragraph.
NOTE ** Delete one of the following two paragraphs.
12. Finish: Manufacturer's standard.
13. Finish: ________________.
NOTE ** The following applies to:
NOTE ** K40-45 Series KM40-45 Series M40-45 Series
NOTE ** P40 Series KIC40-45 Series
F. Sliding Door Plunger Locks:
1. Acceptable Product: Kenstan Lock _____.
2. Barrel length: ____ inch(es) (__ mm).
NOTE ** Delete one of two paragraphs below. K40, K45, KM40, KM45, P40, KIC40, KIC45, M40, and M45 have non-captive operation; K41, K55, KM41, KM55, KIC41, KIC55, M41, and M55 have captive operation.
3. Key Operation: Non-captive.
4. Key Operation: Captive.
NOTE ** Delete one of the following two paragraphs. K40, K41, KM40, KM41, P40, KIC40, KIC41, M40, and M41 have round plunger; K45, K55, KM45, KM55, P42, KIC45, KIC55, M45, and M55 have tee plunger.
5. Plunger Type: Round.
6. Plunger Type: T-shaped.
NOTE ** Delete all but one of the following core types:
NOTE ** 1st is for K Series.
NOTE ** 2nd is for KM Series.
NOTE ** 3rd is for P Series.
NOTE ** 4th and 5th are for KIC Series; 6-pin or 7-pin cores are standard.
NOTE ** 6th and 7th are for M Series; 4-pin core is standard.
NOTE ** Delete two of the following three paragraphs.
14. Strike: Round receiving hole.
15. Strike: Interlocking with "T" plunger.
16. Supply plunger cup.
NOTE ** Delete one of the following two paragraphs.
17. Finish: Manufacturer's standard.
18. Finish: ________________.
NOTE ** The following applies to:
NOTE ** K40GL Series KM40GL Series M40GL Series
NOTE ** P40TG Series KIC40GL Series
G. Sliding Glass Door Plunger Locks:
1. Acceptable Product: Kenstan Lock _____.
NOTE ** Delete one of two paragraphs below. K40GL, KM40GL, P40GL, KIC40GL, and M40GL have non-captive operation; K41GL, KM41GL, P41GL, KIC41GL, and M41GL have captive operation.
2. Key Operation: Captive.
3. Key Operation: Non-captive.
4. Plunger Type: Round.
NOTE ** Delete all but one of the following core types:
NOTE ** 1st is for K Series.
NOTE ** 2nd is for KM Series.
NOTE ** 3rd is for P Series.
NOTE ** 4th and 5th are for KIC Series; 6-pin or 7-pin cores are standard.
NOTE ** 6th and 7th are for M Series; 4-pin core is standard.
NOTE ** Delete one of the following two paragraphs.
12. Finish: Manufacturer's standard.
13. Finish: ________________.
NOTE ** The following applies to:
NOTE ** K48 Series M47-48 Series KM47-48 Series
H. Sliding Door Ratchet Locks:
1. Acceptable Product: Kenstan Lock _____.
NOTE ** Insert required information in the following paragraph; K48R, M47R, M48R, KM47R, and KM48R require 1/4 inch (6.35 mm) maximum door thickness. K48A, M47A, M48A, KM47A, and KM48A require 5/8 inch (16 mm) maximum door thickness.
2. Maximum door thickness: ____ inch(es) (__ mm).
NOTE ** Delete one of two paragraphs below. M47 and M47A have non-captive operation. K48R, K48A, M48R, M48A, KM47R, KM47A, KM48R, and KM48A have captive operation.
3. Key Operation: Non-captive.
4. Key Operation: Captive.
NOTE ** Delete all but one of the following core types:
NOTE ** 1st is for K Series.
NOTE ** 2nd and 3rd are for M Series; 4-pin core is standard.
NOTE ** 4th is for KM Series; Keymatic cores are for high security requirements; keys are ordered separately by code and setting number.
5. Core Type: Flat key; 5 brass disc tumblers.
6. Core Type: Medeco; 4 pin tumblers.
7. Core Type: Medeco; 5 pin tumblers.
8. Core Type: Keymatic.
NOTE ** Delete one of the following two paragraphs; K48R, M47R, M48R, KM47R, and KM48R have standard ratchet. K48A, M47A, M48A, KM47A, and KM48A have adjustable ratchet.
9. Ratchet Type: Standard.
10. Ratchet Type: Adjustable.
NOTE ** Delete one of the following two paragraphs.
11. Finish: Manufacturer's standard.
12. Finish: ________________.
NOTE ** The following applies to:
NOTE ** K35, M35, and KM35 Series locks.
I. Sliding Door Spring Loaded Bolt Locks:
1. Acceptable Product: Kenstan Lock _____.
2. Key Operation: Captive.
NOTE ** Delete one of the following two paragraphs.
3. Bolt Type: Right Hand.
4. Bolt Type: Left Hand.
NOTE ** Delete all but one of the following core types:
NOTE ** 1st is for K Series.
NOTE ** 2nd and 3rd paragraph are for M Series. 4-pin core is standard.
NOTE ** 4th is for KM Series; Keymatic cores are for high security requirements; keys are ordered separately by code and setting number.
5. Core Type: Flat key; 5 brass disc tumblers.
6. Core Type: Medeco; 4 pin tumblers.
7. Core Type: Medeco; 5 pin tumblers.
8. Core Type: Keymatic.
9. Supply door track ramp.
NOTE ** Delete one of the following two paragraphs.
10. Finish: Manufacturer's standard.
11. Finish: ________________.
NOTE ** The following applies to:
NOTE ** K40TT, M40TT, M41TT, KM40TT, and KM41TT Series.
J. Sliding Door Through-Track Locks:
1. Acceptable Product: Kenstan Lock _____.
2. Barrel Length: 1-1/8 inches (28.5 mm).
3. Core Type: Flat key; 5 brass disc tumblers.
NOTE ** Delete one of two paragraphs below. K40TT has non-captive operation; K41TT has captive operation.
4. Key Operation: Captive.
5. Key Operation: Non-captive.
NOTE ** Delete one of the following two paragraphs.
6. Finish: Manufacturer's standard.
7. Finish: ________________.
NOTE ** The following applies to K40EC, K41EC, KM40EC, KM41EC, M40EC,
NOTE ** and M41EC Series locks.
K. Sliding Door End Cap Locks:
1. Acceptable Product: Kenstan Lock _____.
2. Barrel Length: 11/32 inch (8.7 mm).
NOTE ** Insert the appropriate position in the following paragraph:
NOTE ** For right-hand front sliding door - either top left or bottom right.
NOTE ** For left-hand front sliding door - top right.
3. End Cap Position: ___________.
NOTE ** Delete one of two paragraphs below. K40EC, KM40EC, and M40EC have non-captive operation; K41EC, KM41EC, and M41EC have captive operation.
4. Key Operation: Captive.
5. Key Operation: Non-captive.
NOTE ** Delete all but one of the following core types:
NOTE ** 1st is for K Series.
NOTE ** 2nd and 3rd paragraph are for M Series. 4-pin core is standard.
NOTE ** 4th is for KM Series; Keymatic cores are for high security requirements; keys are ordered separately by code and setting number.
6. Core Type: Flat key; 5 brass disc tumblers.
7. Core Type: Medeco; 4 pin tumblers.
8. Core Type: Medeco; 5 pin tumblers.
9. Core Type: Keymatic.
NOTE ** Delete one of the following two paragraphs.
10. Finish: Manufacturer's standard.
11. Finish: ________________.
NOTE ** The following applies to:
NOTE ** M80 Series M90 Series
L. Metal Cabinet Door Handle Locks:
1. Acceptable Product: Kenstan Lock _____.
NOTE ** Delete one of two paragraphs below. M80 and M90 have non-captive operation; M81 and 91 have captive operation.
2. Key Operation: Non-captive.
3. Key Operation: Captive.
NOTE ** Delete one of the following two paragraphs.
4. Core Type: Medeco; 4 pin tumblers.
5. Core Type: Medeco; 5 pin tumblers.
NOTE ** Delete one of the following two paragraphs; National Handle is for M80 and M81; Illinois handle is for M81 and M91.
6. Handle Type: National T Handle.
7. Handle Type: Illinois T Handle.
NOTE ** Delete one of the following two paragraphs.
8. Finish: Manufacturer's standard.
9. Finish: ________________.
M. Metal Cabinet Drawer Locks:
1. Acceptable Product: Kenstan Lock M19.
NOTE ** Delete one of two paragraphs below. M19-2S has non-captive operation; M19 has captive operation.
2. Key Operation: Non-captive.
3. Key Operation: Captive.
4. Latch Type: Deadbolt.
NOTE ** Delete one of the following two paragraphs; 4-pin core is standard.
5. Core Type: Medeco; 4 pin tumblers.
6. Core Type: Medeco; 5 pin tumblers.
NOTE ** Delete one of the following two paragraphs.
NOTE ** Delete one of the following two paragraphs.
4. Finish: Manufacturer's standard.
5. Finish: ________________.
O. Supply accessories indicated or required for installation of locks by manufacturer's printed installation instructions.
2.3 KEYING
NOTE ** Edit the following paragraph if necessary. One key per lock is standard, except for Keymatic cores, where keys are ordered separately by code and setting number.
A. Supply one (1) key for each lock.
NOTE ** Delete one of the following two paragraphs.
B. Key locks alike.
C. Key locks in accordance with Owner-approved keying schedule.
NOTE ** Delete the following paragraph if all locks are keyed alike, or if this is not necessary for this project.
D. Stamp lock faces and keys in accordance with Owner-approved keying schedule.
PART 3 EXECUTION
3.1 INSTALLATION
A. Install locks in accordance with manufacturer's printed installation instructions.
NOTE ** If lock locations are not indicated on the drawings or otherwise described above, include a schedule itemizing the item to be locked, its location on the project, and the type of lock required. Following is an example description.
